Silver Softwash & Powerwash Pole Adapter – 1/4″ to 3/8″
£9.95 +VAT
- Alloy Adapter to fit the #2 section on a Gardiner pole to allow the fitting of pressure washing and soft washing fittings and attachments.
- 1/4″ BSP Female top screw thread – can have an optional female high pressure couplingattached to allow connection to quick-release nozzles.
- 3/8″ BSP Female base thread –Â – to allow a threaded male hose end to be fitted.
- 76g.
- Please note that this adapter should only be used in an open-flow set up – nothing should be fitted above this fitting that can shut the water flow off.
- Working Through-Flow Pressure pressure of 4500psi (310 BAR).
- Working Through-Flow Water Temperature of 60°C.
- Please note that we cannot offer specific product advice or recommendations on softwash systems, pressure washers, hoses or connections to use for an individual pressure washer set-up.
- Description
- Additional information
Description
Fitting Instructions
- Remove the #1 section from a Gardiner pole of the needed length.
- Slide your high pressure power wash hose with 3/8″ Male BSP thread end up the pole and out of the #2 clamp at the top.
- Connect the hose end fitting to the base thread on the adapter (recommended to use PTFE tape).
- Push the adapter back in to the #2 clamp and close the clamp lever to hold it in place.
- Now screw in the powerwash head attachment with suitable 1/4″ male thread connection.
- Extend pole to desired height and start pressure or soft washing.
Additional information
| Weight | 20 g |
|---|
