Description

• 32 micro jets provide precise but gentle rinsing with brush on the glass.
• Fits between brush and brush socket on any 35cm Gardiner brush.
• Provides over-bristle micro jet rinsing.
• Needs a higher flow rate than standard pencil or Fanjets – recommended 2.5lpm – 3lpm.
• Height of jets can be adjusted.
• Can be used with internal brush jets as well.
• Lightweight at 48g.
• Uses John Guest connections on unit.
• Uses standard Brush T Connector and jet hose – optional extra.
• Needs 2 longer screws to allow it to be attached between brush body and brush socket (if used on standard brushes, will need 19mm screws. if used on Xtreme will need 16mm).
• Please note: The rinse bar does not come with the brush & gooseneck pictured.
• If using on Ultimate, Super-Lite & Universal brushes then the standard 16mm screws will need replacing with 19mm screws.
• If using on Xtreme brushes then the standard 13mm screws will need replacing with 16mm screws.