Description

• 16 micro jets provide precise but gentle rinsing with brush on the glass.
• Fits between brush and brush socket on any standard width (26cm) Gardiner brush (not the Sill brush or Supreme).
• Provides over-bristle micro jet rinsing.
• Flow rate is half that of the standard micro-jet rinse-bar and about equivalent to standard pencil or Fanjets – recommended 1.5 – 2lpm.
• Jet angle is 3° higher than standard rinsebar to allow for lower flow rates.
• Height of jets can be adjusted.
• Can be used with internal brush jets as well.
• Lightweight at 41g.
• Uses John Guest connections on unit.
• Uses standard Brush T Connector and jet hose – optional extra.
• Needs 2 longer screws to allow it to be attached between brush body and brush socket (if used on standard brushes, will need 19mm screws. if used on Xtreme will need 16mm).
• Please note: The rinse bar does not come with the brush & gooseneck pictured.